Vertical Drip Rain Testing Machine HH0801 Manufacturer

Vertical Drip Rain Testing Machine HH0801

: http://hctestequipment.com

Standard
IEC60529 degree of protection provided by enclosures (IP Code) of the IPX1 and IPX2, IEC60884-1, IEC60335-1, IEC60598-1.

Application
It is used for the testing of IPX1 and IPX2.

Test sample
The rain testing machine is used to determine water proof functions for devices, such as electronic appliances, lamps, electrical cabinets, electrical components, and cars.

Feature
It is equipped with the rotatable objective table whose rotating speed is 1r/min for IPX1 test. It is also equipped with a 15°bevel for supporting samples for the IPX2 test. This device features a clean water filtration unit which can prevent the pinholes from jamming, it is controlled by PLC electrical control system, and touch screen operation.

Parameters

Item	Parameter
Input power	Single-phase AC220V,50Hz
Water supply	Water flow rate＞10L/min±5% clean water without inclusion. This device is equipped with clean water filtration unit
Control and operation	PLC intelligent control, 7 inch color touch screen operation
Testing time	0-999.9min
Water tank size	Outline dimension:WDH=1100×800×350mm, fully enclosed water tank, SUS304 material
Drip test area	1000×600mm, customizable
Drip height	200mm, adjustable
Dripping rate (Water flow)	1 0.05 0mm/min or 3 0.05 0mm/min switchable, adopt digital controlled rainfall technology
Needle hole	Φ0.4mm
Distance between holes	20mm
Rotary table	Diameter:Φ600mm; Rotating speed1r/min. Can be paused 150s at four aspects,Load bearing≤150㎏electrical equipment
Supporting sample	15°bevel
Water tank lifting drive	Motor drive, screw guide rail to ensure the stable lifting and self-locking
Installation method	Wall mounted or floor type
Site requirements	Dedicated IP waterproof test room, The ground should be flat with illumination 10A waterproof leakage switch(or socket)used for equipment. With good function of inflow and drainage. Ground installation
Area covered	WDH =1500mm×1500mm×2650mm, the size can be set according to customer's requirements