Package during shipment
Hemp rope is all right while iron chain and wire rope should not be used. All the overhanging parts of the machine should be strapped by the rope, and the machine's surface must be protected by elastic items such as rubber or sponge. Solid board is needed to seal the whole machine firmly.

• This cartoning machine is a type of packaging equipment. It can be installed in rooms with good ventilation and adequate lighting.
• A spare distance of 1.5m is required around the machine for operation and maintenance.
• 380V-50HZ three-phase AC power supply and electrical grounding is necessary.
• It must be installed on a relatively flat ground. After installation, level of the machine should be checked by a gradienter. When it is not, you should adjust the four feet of the machine to keep it level.
• Every part should be checked if it is loose after being installed. Any mistake should be ruled out as soon as possible. To prevent rust, the machine is greased before being shipped. Thus, the excess grease on the surface should be cleaned before you run the machine. Cotton and alcohol is needed for the cleaning. After that, lubricating of certain parts is necessary.

• Keeping clean of the machine is necessary, and the rotating parts need to be cleaned and lubricated frequently.
• Cam structure and transmission chains should be lubricated every 15~40 hours. Motor oil of brand 50 is recommended (kinematic viscosity is around 47~53mm2/S50℃). Gear meshing parts should be lubricated every three months and Albany grease is recommended (ZG-1 or ZG-2).
• Cog belt and driving belt should not be contacted with grease, in order to lengthen its life span.
• To ensure regular and stable run of the machine, it should be shut down every three months to check the tension of the transmission chain and transmission parts. When it is necessary, you should adjust and fasten certain parts of it.
• Any breakdown of the machine should be carefully taken care of by professional mechanic. To avoid damage to any part of the machine, self dismantling is not allowed.

After-sale service
One year of maintenance is provided counted from the day of shipment. If any service abroad is needed, the customer has to afford the tickets, accommodation and a wage of 80 dollars per day for our repairmen.