Automatic Layer for High Frequency CCL Board
For special requirements for high frequency CCL, LEAD has taken creative measures to optimize its return line in order to achieve wholly automatic pressing of the CCL board.
Manufacturing process- Automatic stack-up
- Automatic breakdown
- Automatic returning of steel plate
Custom designing for workshop
LEAD can custom design this equipment for customer workshops.
High efficacy
A high efficacy can be achieved by on-line cutting of the copper foil.
Low energy consumption
In order to decrease the energy consumption and optimize the control system, the capacity of every unit is calculated and custom designing is essential.
Suction hoist for automatic stack-up
Uses
Automatic arranging of plates
- Stackup mode: automatic stack-up of aluminum foil, copper foil, prepreg, aluminum foil
- Stackup accuracy: ±1.5mm
- Stackup speed: 15 seconds/layer
Cutting machine
Uses
Copper foil cutting
- Cutting accuracy: length error±0.5mm/m, diagonal error±1mm/m
- Thickness: 1/3~2OZ
- Cutting mode: automatic cutting
- Cutting speed: 0~60m/min
Suction hoist for automatic breakdown
Uses
The Suction hoist can separate steel plate and CCL
- Breakdown mode: manipulator separating;
- Separating speed: 15 seconds/layer;
- Intelligent control: achieve remote monitoring, reserve PLC interface and ERP interface
Automatic overturn
Uses
The Suction hoist can flip steel plate over
- Double check the steel plates, and eliminate any problematic ones in order to lower the reject rate.
- Improve the quality by preventing the CCL board from coming into contact with a steel plate exposed to kraft paper
- Avoid uneven force on both sides of steel plate
Steel Plate Cleanser
Uses
Cleaning and drying steel plate
- Speed up to 45m/min;
- Four or two cleaning brush;
- Cleaning water is high pressure water, and can achieve cyclic utilization after filtering;
- Hot drying of fan, or air drying with linear high pressure
- Coated by release agent.
Related products
Send Message
Most Recent
More
Other Products
Videos
