Thermal Shock Chamber (Two Zones)
The thermal shock chamber is designed with independently controlled hot and cold zones. The tested product will be transferred between two zones to simulate rapid temperature fluctuations.
The interior and exterior of the thermal shock chamber is made of SUS 304 stainless steel. The exterior features a matte finish. High density and temperature resistant foams are applied as the insulation materials of the chamber.
We can provide custom-made thermal shock chambers of various dimensions and functions to meet your special requirements.
Parameters
| Model | CZ-H-42(A~C) | CZ-H-80(A~C) | CZ-H-150(A~C) | CZ-H-252(A~C) | CZ-H-450(A~C) |
| Workspace Dimensions-HxWxD (cm) | 40×35×30 | 50×40×40 | 60×50×50 | 70×60×60 | 80×75×75 |
| Exterior Dimensions-HxW xD (cm) | 140x180x145 | 148X190X155 | 160x200X175 | 175x210X187 | 190x220x200 |
| Temperature Range | 150℃~A: -45℃; B: -55℃; C: -65℃ | ||||
| Temperature Range in Hot Chamber | 60℃~ 150℃ | ||||
| Temperature Range in Cold Chamber | -10℃~-65℃ | ||||
| Temperature Changing Speed in Hot Chamber | RT~200℃ About 35min | ||||
| Temperature Changing Speed in Cold Chamber | RT~-70℃ About 85min | ||||
| Changeover Time Between Hot/Cold Chamber | ≤5min ／ ≤10sec | ||||
| Temperature Homogeneity | ±0.5℃ ／ ±2.0℃ | ||||
| Power | AC380V 50HZ/60HZ 3∮ (Optional) | ||||
| Approximate Weight | 700Kg | 900Kg | 1200Kg | 1400Kg | 1900Kg |
Features
- The thermal shock chamber uses touch operation which is very convenient to use.
- It features wide setting range for high temperature shock or low temperature impact. Its maximum time is up to 999H. Its maximum cycle is up to 9999 times.
- It uses a binary refrigeration system for rapid cooling. This is a water cooled system.
Related products
Send Message
Most Recent
More
Other Products
Videos
