Mining Jig Separator
Mining Jig Separator
Mining jig separator takes advantages of impulsive motion to make the material layered in the separating medium. Then, it respectively discharges the stratified materials. As one of the modern type gravity concentration equipment, our product features large processing capacity, wide range of grading granularity, as well as convenient operation and maintenance. It can be widely used for rough selection or fine selection of gold, tin, titanium, hematite, iron ore, coal and so on. Particularly in the manganese field, it is well received by our customers.
Main Specifications
Type | Model | Shape of the cross section of jip chamber | Jig chamber | Stroke factor | Diaphragm | Max. | Capacity, t/h | Water Consumption, t/h | Motor Power, KW | 重量Weight kg | |||||
L×W, mm | Unit area, m2 | No. of column | No. of chamber | Total area, m2 | Stroke | Time of stroke | |||||||||
Lateral-driven | LTP- 34/2 | Square | 450×300 | 0.135 | Single | 2 | 0.27 | 0.58 | 0~25 | 320~420 | 12 | 2~6 | 4~10 | 1.1 | 750 |
Bottom-driven | LTA- 55/2 | Square | 500×500 | 0.25 | Single | 2 | 0.5 | 0.5 | 0~26 | 250~350 | 5 | 1~5 | 4~20 | 1.1 | 600 |
LTA- 1010/2 | Square | 1000×1000 | 1.0 | Single | 2 | 2.0 | 0.5 | 0~26 | 250~350 | 5 | ~25 | 20~60 | 2.2 | 1516 | |
Side-driven | LTC- 69/2 | Square | 900×600 | 0.54 | Single | 2 | 1.08 | 0.56 | 0~50 | 220~350 | 12 | 6~9 | 40~60 | 1.5 | 1420 |
2LTC- 79/4 | Square | 900×700 | 0.63 | Double | 4 | 2.52 | 0.48 | 0~50 | 160~250 | 12 | 5~15 | 20~90 | 2.2 | 2450 | |
2LTC- 912/4 | Square | 1200×900 | 1.08 | Double | 4 | 4.32 | 0.49 | 0~50 | 160~250 | 12 | 7~25 | 60~120 | 3 | 3500 | |
2LTC- 366/8T | Square | 600×(300-600) | 0.2~0.34 | Double | 8 | 2.16 | 0.68 | 0~50 | 120~300 | 5 | 3~6 | 20~40 | 1.1×2 | 1600 | |
2LTC- 6109/8T | Square | 900×(600-1000) | 0.58~0.86 | Double | 8 | 5.76 | 0.52 | 0~50 | 120~300 | 5 | 10~20 | 80~120 | 2.2×2 | 4650 | |
Working Principle
After the raw ore is sent to the jig chamber, the ore grain is stratified according to the specific gravity under the pulsation of diaphragm. The fine and heavy ore grain can pass through the artificial bed particle clearance and sieve pore, and then sink in the ore storage bucket. The coarse and light ore grain is sent by the medium flow to the ore discharge outlet. The rear jig chamber is
Product Marketing
The Batac jig is produced by our company, which adopts multi chambers shared NC air valve technology as well as cone shaped slide valve. It features reliable operation, 70 percent reduction in failure rate, low energy consumption, reasonable structure, convenient transportation and installation, 30 percent reduction in equipment load, and above 70 percent decay of power etc. In addition, this product can meet the requirement for separating different medium and also increase the processing capacity by over 20 percent.
跳汰机是人类最早用来选矿的重力选矿设备之一，也可称为gravity separation jig。跳汰机属于深槽型中选设备，所有的跳汰机都具有跳汰室、鼓动介质运动的机构和产品排出机构。我公司生产多种不同型号的跳汰机，冲程和冲次可根据所选矿物的比重灵活调节，他们的冲程最大可达到
