G-BN2 Solid Carbide End Mill for Graphite Machining - Ball Nose - 2 Flutes - Long Neck
Request a quote
Unit: mm
| Order Code | Cutting Diameter (D) | Ball Radius (R) | Neck Length (L1) | Length of Cut (Lc) | Neck Diameter (d2) | Overall Length (L) | Shank Diameter (d) | Type |
G-BN2-00505 | 0.5 | 0.25 | 5 | 2 | 0.46 | 50 | 4 | A |
G-BN2-00606 | 0.6 | 0.3 | 6 | 2 | 0.55 | 50 | 4 | A |
G-BN2-00610 | 0.6 | 0.3 | 10 | 2 | 0.55 | 50 | 4 | A |
G-BN2-00808 | 0.8 | 0.4 | 8 | 3 | 0.75 | 50 | 4 | A |
G-BN2-00815 | 0.8 | 0.4 | 15 | 3 | 0.75 | 50 | 4 | A |
G-BN2-01008 | 1 | 0.5 | 8 | 3 | 0.95 | 60 | 4 | A |
G-BN2-01010 | 1 | 0.5 | 10 | 3 | 0.95 | 60 | 4 | A |
G-BN2-01508 | 1.5 | 0.75 | 8 | 5 | 1.44 | 75 | 4 | A |
G-BN2-01515 | 1.5 | 0.75 | 15 | 5 | 1.44 | 75 | 4 | A |
G-BN2-01525 | 1.5 | 0.75 | 25 | 5 | 1.44 | 75 | 4 | A |
G-BN2-02010 | 2 | 1 | 10 | 6 | 1.92 | 75 | 4 | A |
G-BN2-02015 | 2 | 1 | 15 | 6 | 1.92 | 75 | 4 | A |
G-BN2-02025 | 2 | 1 | 25 | 6 | 1.92 | 75 | 4 | A |
G-BN2-03015 | 3 | 1.5 | 15 | 8 | 2.9 | 75 | 4 | A |
G-BN2-03025 | 3 | 1.5 | 25 | 8 | 2.9 | 75 | 4 | A |
G-BN2-04025 | 4 | 2 | 25 | 12 | 3.9 | 75 | 4 | B |
G-BN2-04040 | 4 | 2 | 40 | 12 | 3.9 | 100 | 4 | B |
G-BN2-06025 | 6 | 3 | 25 | 18 | 5.9 | 75 | 6 | B |
G-BN2-06040 | 6 | 3 | 40 | 18 | 5.9 | 100 | 6 | B |
G-BN2-08030 | 8 | 4 | 30 | 20 | 7.9 | 100 | 8 | B |
G-BN2-08040 | 8 | 4 | 40 | 20 | 7.9 | 100 | 8 | B |
G-BN2-10035 | 10 | 5 | 35 | 25 | 9.8 | 100 | 10 | B |
G-BN2-10050 | 10 | 5 | 50 | 25 | 9.8 | 100 | 10 | B |
G-BN2-12050 | 12 | 6 | 50 | 25 | 11.8 | 100 | 12 | B |
Type A: the cutting diameter is smaller than the shank diameter
Type B: the cutting diameter is equal to the shank diameter
Related products
Send Message
Most Recent
More
Other Products
Videos
