NC Hydraulic Shearing Machine
Description
The QC12K series NC hydraulic shearing machine with swing beam is equipped with an economical CNC shear special system, and the back gauge uses imported ball screws and a linear guideway.
- Temperature: 0°C - 40°C
- Humidity: relative humidity is lower than 90%
- Voltage: 3 phase 380V (-15%, +15%), 50Hz
Type | QC12K-4×2500 | QC12K-4×3200 | QC12K-4×4000 | QC12K-6×2500 | QC12K-6×3200 | QC12K-6×4000 | QC12K-6×6000 | QC12K-8×2500 | QC12K-8×3200 | QC12K-8×4000 | QC12K-8×5000 | QC12K-8×6000 | QC12K-12×2500 | QC12K-12×3200 | QC12K-12×4000 | QC12K-12×6000 | QC12K-16×2500 | QC12K-16×3200 | QC12K-16×4000 | QC12K-16×6000 | QC12K-20×2500 | QC12K-20×3200 | QC12K-20×6000 | QC12K-25×2500 | QC12K-25×3200 | QC12K-32×2500 | QC12K-32×3200 | QC12K-40×2500 | |
Shear specification | 4×2500 | 4×3200 | 4×4000 | 6×2500 | 6×3200 | 6×4000 | 6×6000 | 8×2500 | 8×3200 | 8×4000 | 8×5000 | 8×6000 | 12×2500 | 12×3200 | 12×4000 | 12×6000 | 16×2500 | 16×3200 | 16×4000 | 16×6000 | 20×2500 | 20×3200 | 20×6000 | 25×2500 | 25×3200 | 32×2500 | 32×3200 | 40×2500 | |
Shear angle | 1°30' | 1°30' | 1°30' | 1°30' | 1°30' | 1°30' | 1°30' | 1°30' | 1°30' | 1°30' | 1°30' | 1°16' | 2° | 2° | 1°54' | 2° | 2°9' | 2° | 2° | 2° | 3° | 2°30' | 2°30' | 3° | 3° | 3°30' | 3°30' | 3°30' | |
Number of stroke | min-1 | ≥22 | ≥18 | ≥12 | ≥16 | ≥12 | ≥10 | ≥7 | ≥12 | ≥10 | ≥10 | ≥8 | ≥6 | ≥10 | ≥9 | ≥8 | ≥4 | ≥9 | ≥8 | ≥7 | ≥4 | ≥5 | ≥5 | ≥4 | ≥5 | ≥5 | ≥4 | ≥4 | ≥3 |
Back gauge adjustment | mm | 20-600 | 20-600 | 20-600 | 20-600 | 20-600 | 20-800 | 20-800 | 20-600 | 20-600 | 20-600 | 20-800 | 20-800 | 20-800 | 20-800 | 20-800 | 20-1000 | 20-800 | 20-800 | 20-1000 | 20-1000 | 20-1000 | 20-1000 | 20-1100 | 20-1000 | 20-1000 | 20-1000 | 20-1500 | 20-1000 |
Throat depth | mm | 85 | 85 | 85 | 145 | 145 | 145 | 140 | 145 | 145 | 145 | 300 | 300 | 300 | 300 | 300 | 320 | 315 | 320 | 320 | 320 | 325 | 320 | 150 | 325 | 325 | 350 | 350 | 200 |
Main motor power | kW | 5.5 | 5.5 | 5.5 | 7.5 | 7.5 | 7.5 | 11 | 11 | 11 | 11 | 18.5 | 18.5 | 18.5 | 18.5 | 18.5 | 30 | 22 | 22 | 30 | 45 | 30 | 37 | 55 | 37 | 37 | 45 | 45 | 45 |
Net weight | kg | 3460 | 4280 | 6600 | 5140 | 6220 | 8520 | 17000 | 5900 | 7360 | 10200 | 18000 | 21800 | 9000 | 10700 | 13800 | 38000 | 11100 | 14300 | 19700 | 44000 | 16700 | 22000 | 51000 | 20000 | 27000 | 32500 | 42100 | 48000 |
Outline size (L×W×H) | mm | 3100×1430×1450 | 3800×1555×1500 | 4600×1705×1600 | 3150×1500×1600 | 3850×1600×1620 | 4650×1850×1700 | 6780×2450×2100 | 3180×1680×1700 | 3880×1830×1720 | 4680×1980×1780 | 5855×2260×2100 | 6880×2260×2100 | 3300×2030×1840 | 4000×2100×1940 | 4800×2270×2000 | 6900×2800×2500 | 3310×2240×2000 | 4030×2390×2100 | 4820×2490×2460 | 7100×2900×2650 | 3370×2545×2250 | 4190×2695×2300 | 7100×3500×3050 | 3450×2650×2800 | 4130×3100×2800 | 3550×3100×2800 | 4335×3300×3280 | 3600×3450×3200 |
- The frame of the shear machine is entirely welded with steel plates, and treated through a tempering process in order to relieve stress
- The hydraulic dive and return stroke are both smooth and fast thanks to the accumulator, and are easy to manipulate for a reliable performance.
- The portable and prompt adjustment of the blades gap and the value of gap are displayed on a digital display screen, making adjustment easy and fast.
- Equipped with lighting-alignment for strict shearing alignment. The knife beam stroke can be adjusted in a stepless mode.
- Protection fence to ensure operation safety.
- On the rear, there is a simple plate to facilitate material sliding
- Sealing parts of the cylinder: Imported from VALQUA japan, FIETZ Germany.
- Cylinders: Made in china. Surface of the piston is chromium plated.
- Hydraulic system uses imported BOSCH-RexROTH parts.
- Oil pump: gear pump made in China
- Electrical system: Most of the parts in the electrical cabinet are imported from SCHNEIDER, OMRON.
- Control system uses ESTURN E200 System.
- Painting: Dutch imported paint.
- The drive element of the back uses an imported ball screw and linear guideway.
ESTUM E20 CNC system is a professional system for press Shears.
- Motor driven back-gauge automatic orientation
- Motor dead block automatic orientation
- Single direction orientation, to eliminate screw driving gap
- Back-gauge automatically moves in order to avoid interference between the back gauge and work piece.
- Multi-step program automatically performs multiple actions
- 99 working steps could be stored in the memory.
- Outage memory. Store the parameters, programs, positions when the power is switched off.
- Switch between Metric/Imperial system to satisfy different customers.
- Auto-locate reference point. Program counting, step counting and cutting counting.
Related products
Send Message
Most Recent
More
Other Products
Videos