Veterinary Endoscope Camera System, INP-800 Manufacturer

Veterinary Endoscope Camera System, INP-800

: http://endoscope-cameras.com/1-1-veterinary-endoscope-camera-system.html

This endoscope camera is our standard-type camera tailored for animal health. It provides Full HD imaging with 30 frames per second. This endoscope camera is lightweight and cost-effective, given that it is also applicable for cystoscopy, arthroscopy, otolaryngoscopy and minimally invasive surgery.

Features

This endoscope camera is able to transmit signals in accordance with HD-SDI standards. It also supports DVI/VGA/CVBS and SDI loop outputs;

This veterinary endoscope camera is equipped with a 1/3” CMOS with 2 MP that delivers Full HD imaging with 30 frames per second;

The energy cost is relatively small and the camera body will generate little heat during operation;

This endoscope camera can carry out different functions, like white balance, image freeze. It is also equipped with a USB port and AD-KEY module;

Multi-language control menu is also enabled;

Specifications

Camera parameters

Scan system: progressive scan
Horizontal resolution:
Digital 1080(30P),720(60P)
Max.: 1100TVL(1080P)
S/N ratio: greater than 50dB (AGC off)
Minimum illumination: 1Lux (color), 0.5Lux (black/white)
Video output: HD-SDI, 1Vp-p, 75ohm composite
OSD (on-screen display) menu: available
Lens: manual
Shutter speed: 1/30 ~ 1/60,000(NTSC), 1/25 ~ 60,000(PAL)
Gain control: off/low/medium/high
WDR/BLC: off/BLC/WDR
DNR: off/low/medium/high
White balance: automatic/automatic ext/pushing/manual
Sharpness: 0~10 adjustable
Gamma: 0.45~0.75
Format: PAL/NTSC
Reset: on
Language: English, Chinese, Japanese, German, French, Russian, Korean, Spanish
Power: DC12V, max. 1.5W
Size: Ø26mm (3 ply)

Motherboard

Input: SDI(270M/1.485G/3G)
Output: DVI/HDMI/VGA/SDI/CVBS
Power supply: DC 10.8V~ 13.2V
DC socket: PIN1" " PIN2"-"
Camera socket: 10PH2.0mm connector
SDI input: 75Ω, SMA
SDI output: 75Ω, BNC-F
DVI /HDMI: DVI /HDMI connector
VGA: 6PH2.0mm connector
CVBS: 75Ω, BNC-F
USB drive: FAT32(Max 128G)
Red LED: power to light up
Green LED: SDI lock
Button: 6PH2.0mm connector
Mode switch: 10 Level connector
Dial switch: 4 sets
UART1: 4PH1.25mm connector
UART2: 4PH1.25mm connector
Max. power: 12.0W
PCB size: 145mm×80mm
Operation temperature: -10~ 50℃
Operation humidity: 5~90%RH
Adapter: input AC 110~240V, output DC 12V/2A